Ultra-Green LED indicator IP 67 with out side reflector; Ultrabright; Diameter 8 mm; Tab terminal 2.8x0.8mm; Voltage: 12/14V; Increased viewing angle and homogeneous illumination of the LED body

LED indicator IP 67 with out side reflector; Diameter: 8mm; Colour: yellow; Voltage: 230Vac; Tab terminal 2.8x0.8mm; Increased viewing angle and homogeneous illumination of the LED body

Yellow LED indicator IP 67 with out side reflector; Ultrabright; Diameter: 8 mm; Tab terminal: 2.8x0.8mm; Voltage: 12/14V; Increased viewing angle and homogeneous illumination of the LED body

LED indicator IP 67 with out side reflector; Diameter: 8mm; Colour: red; Voltage: 230Vac; Tab terminal 2.8x0.8mm; Increased viewing angle and homogeneous illumination of the LED body

Red LED indicator IP 67 with out side reflector; Ultrabright; Diameter: 8 mm; Terminal tab: 2.8x0.8mm; Voltage: 12/14V; Increased viewing angle and homogeneous illumination of the LED body

Heat sink TO-3 with black anodized

Audio speaker transducer; Case Material: LCP; Pin Material: Sn Plated Brass; Piezo-based device for ultra-low current draw; Mounting: Surface Mount; Frequency: 4000 ± 500 Hz; Height: 1,90 mm; Width: 9,00 mm; Length: 9,00 mm

8 ohm speaker; 500 mW 500 Hz ~ 10 kHz; Square; 87dB

Three phase power solid state relay; Zero Cross Solid State Relay specially designed for most types of loads; Output: 24-520VAC (±10%); Input: 24-255VAC/DC; Over-Voltage protection on input (transil) and output (RC+VDR); Thyristors: 50A / 1600Vpeak; Resistive: 24A AC51; Motor: 12A AC53

Transducers; Measurement: Voltage; Nominal Value: 2000V; Measuring Range: 3000V; Second. Nominal Signal: Current; Second. Nominal Signal Value: Instantaneous 20 mA; Primary Signal: AC + DC; Supply Voltage: External DC Bipolar; Supply Voltage Range: 15-24V; Accuracy: 1.2%; Op. Temperature: -40°C/70°C; Technology: Closed loop Hall effect; Mounting: Panel

Current Transducer; LF Series; Technology: Closed Loop; Primary nominal value: 200A; Measuring range: 420A; Secondary nominal signal: 100mA; Supply voltage: +/- 12..15Vdc; Accuracy (%): 0.5; Mounting: PCB

Transductor de Corriente, Serie HAL, 100A, -300A a 300A, 1 %, Salida Analógica 4V, -15 Vdc a 15 Vdc